10PCS Single Phase Type Solid State Relay SSR 40DD 3-32VDC Input to 5-60VAC Output SSR Solid State Relay

10PCS Single Phase Type Solid State Relay SSR 40DD 3-32VDC Input To 5-60VAC Output SSR Solid State RelaySolid State Relay SSR-40DDFeatures1.the most traditional classic style, reliability, reliability. In the case of2.the input signal is compatible with TTL and COMS digital logic circuits. In the case of3.TRIAC output, zero trigger (zero current on, zero current off). In the case of4.set the RC snubber circuit and MOV surge over-voltage absorber. In the case of5.the unique anti-surge suppression circuit, in line with the EU EMC directive. In the case of6.input and output optical isolation, pressure 4000V or more. In the case of7.working status LED indicator. In the case of8.equipped with anti-shock safety cover, in line with IEC62529 the IP20 level. In the case of9. load current aging test.ModelSSR-10DDSSR-25DDSSR-40DDSSR-50DDControl methodDC-controlledDC(DC-DC)Load current10A,25A,40A,50ALoad voltage5-60VDC,5-110VDC,5-250VDCControl voltage3-32VDCControl current6-50mAOn-state leakage current2mAOn-state step-down2.3VDCOff time10mSMedium pressure2000VACInsulation resistance500M/500VDCAmbient temperature-30-+75Installation methodBoltfixedWork instructionsLEDweight132gApplicationsSSR series of solid-state relay using flame-retardant engineering plastic shell, epoxy potting, thread lead-out wiring, with high structural strength, impact resistance, anti-vibration, the input drive current is small and convenient computer terminals and various digital Programmable circuit interface, widely used in petrochemical equipment, food machinery, packaging machinery, textile machinery, machine tools, plastic machinery, fitness equipment, entertainment facilities, and other areas of automation and control. Particularly applicable to corrosion, moisture, dust, explosion-proof requirements such as harsh environments, and frequent switching occasions, AC contactor update replacement products.Precautions1. Do not load short circuit, so as not to burn solid state relays, optional special fast fuse;2. Installation should be away from the heat , more than one relay should be left between the full gap, the radiator temperature should not exceed 75 , should be away from electromagnetic interference, radio frequency interference and other strong sources of interference;3. Heat the radiator, the contact surface should be in close contact, and coated with thermal grease to reduce the thermal resistance and improve the cooling effect;4. Solid state relay output is off, there is still a certain leakage current output, in the use or design, please note;5. Long-term working current should not exceed 70% of the nominal value Inductive load is best applied with varistor protection.==========Power : Theory : Solid State RelayProtect Feature : SealedUsage : General PurposeContact Load : High PowerModel Number : SSR-40DDVoltage : 0Rated Current : 25A maxSurge current : 50A maxApplication : Mechanical equipment, plastic machinery, chemical equipment, etcPeak voltage : 600VDCResponse time : 1.0 msDirectional Control : 5-120VDC

• 10PCS Single Phase Type Solid State Relay SSR 40DD 3-32VDC Input To 5-60VAC Output SSR Solid State Relay