Bykski Full Coverage GPU Water Block and Backplate for Asrock RX 6800/6900 XT (A-AR6900XT-X)

★★★★★ 4.4 112 Bewertungen

€100.80
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von readytopress.bigdaddystitches.com
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€100.80
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 25.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von readytopress.bigdaddystitches.com
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 219735554 Erscheinungsdatum 2026/05/03 Listenpreis €100.80 Modellnummer 219735554
Kategorie

The block is constructed of high purity copper that is electroplated to prevent oxidation. A high flow design is used to allow multiple blocks to run in series. Top and bottom ports can be used to configure parallel or serial designs in multi block set ups. Compatibility (Including but not limited to the following models) Asrock RX6900XT Phantom Gaming D 16G OC Asrock RX6900XT Taichi X 16G OC Asrock RX6800XT Phantom Gaming D 16G OC Asrock RX6800XT Taichi X 16G OC Please check over the entire PCB picture after narrowing your selection to ensure compatibility. If you have any questions, please contact support for confirmation. Compatibility based on these circuit board designs only Fittings: G 1/4in. Thread Parts Included 1x Full Coverage GPU Water Block 1x Backplate 2x Stop Fitting 1x Mounting Hardware Thermal grease 1x 5v A-RGB (RBW) Light (Warning: Addressable RGB (RBW) is 5V and is ONLY compatible with Addressable RGB (RBW) components. RGB is 12V and is ONLY compatible with RGB components. Mix and match will NOT work and will cause damage. Warnings This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it. Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. Please see product gallery images for install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points with the exception of the GPU core, which uses thermal paste. For -TC SKU blocks with active backplates, the VRAM on the back of the card should be padded. Installing pads on other components can lead to improper contact and poor performance. Not responsible for any damage caused by or when using this product. Please use at your own risk.

  • Achieve great temperatures along with the ability to reach higher overclocks or extend the overall lifespan of your card by running at below factory temps.
  • Directly cools the video cards core (GPU), graphics memory (RAM), and voltage regulator modules (VRM) on both sides of GPUs
  • Block Material: Electroplated High Purity Copper / Acrylic
Voltage 12 Volts
Brand Name Bykski
Unit Count 1 Count
Item Weight 81.6 Ounces
Part Number A-AR6900XT-X
Manufacturer Bykski
Material Type Copper
Cooling Method Water
Number of Items 1

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.4 von 5
★★★★★
112 Bewertungen | 46 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
81% (91)
4 Sterne
5% (6)
3 Sterne
2% (2)
2 Sterne
1% (1)
1 Stern
11% (12)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.